Featured

  • China Gold Supplier for Ct Magnetic Core - Sendust Ring Inductors Powder Core – Pourleroi

    China Gold Supplier for Ct Magnetic Core - Sendust Ring Inductors Powder Core – Pourleroi

    In 1932,Masumoto and Yamamoto at Tohoku Imperial University developed new Fe–Si–Al alloys. The alloys were discovered in Sendai and designed for magnetic dust core, so they named the alloys “Sendust” (Masumoto and Yamamoto, 1937). They found that the alloys with 6–11 wt% Si and 4–8 wt% Al show excellent soft magnetic properties. Among them, the Fe–9.62Si–5.38Al shows the largest initial permeability of 35100 and a low coercivity of 1.75 A/m; the Fe–9.66Si–6.21Al shows the largest maximum perm...
  • Quality Inspection for Nanocrystalline High Frequency Transformer Core - Sendust Cutting Core for Flat Wire Winding – Pourleroi

    Quality Inspection for Nanocrystalline High Frequency Transformer Core - Sendust Cutting Core for Flat Wire Winding – Pourleroi

    FeSiAl magnetic ring 1. The magnetic flux density of the ferrite is equal to or less than 0.5T, which is less than half of the iron-silicon-aluminum alloy. Therefore, under the same volume, the energy storage capacity of ferrite is also lower than that of iron-silicon-aluminum alloy. 2. In addition, the full magnetic flux density of ferrite is greatly reduced under high temperature conditions, while high temperature conditions have no obvious effect on FeSiAl. 3. Ferrite has the characteristi...
  • China Gold Supplier for Toroidal Ferrite Core Choke Coil - Sendust Ring Inductors Powder Core – Pourleroi

    China Gold Supplier for Toroidal Ferrite Core Choke Coil - Sendust Ring Inductors Powder Core – Pourleroi

    In 1932,Masumoto and Yamamoto at Tohoku Imperial University developed new Fe–Si–Al alloys. The alloys were discovered in Sendai and designed for magnetic dust core, so they named the alloys “Sendust” (Masumoto and Yamamoto, 1937). They found that the alloys with 6–11 wt% Si and 4–8 wt% Al show excellent soft magnetic properties. Among them, the Fe–9.62Si–5.38Al shows the largest initial permeability of 35100 and a low coercivity of 1.75 A/m; the Fe–9.66Si–6.21Al shows the largest maximum perm...
  • Discount wholesale Hi-Fi Audio Transformer Nanocrystalline C Core - Nanocrystalline core Nanocrystalline current transformer core – Pourleroi

    Discount wholesale Hi-Fi Audio Transformer Nanocrystalline C Core - Nanocrystalline core Nanocrystalline current transformer core – Pourleroi

    Application field ·Inverter reactor, transformer core ·Wide constant permeability inductor core, PFC inductor core ·Intermediate frequency transformer core/distribution ·Transformer core in medical X-ray, ultrasound, MRI. ·Transformer cores in electroplating, welding, induction heating machines. ·Inductors (chokes) for solar, wind, railway electricity. Performance Characteristics High saturation magnetic induction intensity and high magnetic permeability-high precision, precision, miniaturiza...
  • Best Price on Amorphous Core Iron Core - Sendust Core Powder Inductor for AC Transformer – Pourleroi

    Best Price on Amorphous Core Iron Core - Sendust Core Powder Inductor for AC Transformer – Pourleroi

    What are the advantages of iron-silicon-aluminum magnetic ring in the application of inductors Although ferrosilicon has a higher saturation flux density, ferrosilicon has more advantages, such as better soft saturation, low core loss, temperature stability and lower cost. When the inductor uses the iron-silicon-aluminum magnetic powder core, the disadvantageous factors brought by the use of the air-gap ferrite magnetic ring can be eliminated. FeSiAl magnetic ring 1. The magnetic flux density...
  • Factory selling Nano Iron Core - Sendust Ring Inductors Powder Core – Pourleroi

    Factory selling Nano Iron Core - Sendust Ring Inductors Powder Core – Pourleroi

    In 1932,Masumoto and Yamamoto at Tohoku Imperial University developed new Fe–Si–Al alloys. The alloys were discovered in Sendai and designed for magnetic dust core, so they named the alloys “Sendust” (Masumoto and Yamamoto, 1937). They found that the alloys with 6–11 wt% Si and 4–8 wt% Al show excellent soft magnetic properties. Among them, the Fe–9.62Si–5.38Al shows the largest initial permeability of 35100 and a low coercivity of 1.75 A/m; the Fe–9.66Si–6.21Al shows the largest maximum perm...
  • Factory directly Nano Core Amorphous - Sendust Cutting Core for Flat Wire Winding – Pourleroi

    Factory directly Nano Core Amorphous - Sendust Cutting Core for Flat Wire Winding – Pourleroi

    FeSiAl magnetic ring 1. The magnetic flux density of the ferrite is equal to or less than 0.5T, which is less than half of the iron-silicon-aluminum alloy. Therefore, under the same volume, the energy storage capacity of ferrite is also lower than that of iron-silicon-aluminum alloy. 2. In addition, the full magnetic flux density of ferrite is greatly reduced under high temperature conditions, while high temperature conditions have no obvious effect on FeSiAl. 3. Ferrite has the characteristi...
  • China Factory for High Quality High Frequency Iron Core Split - Sendust Core Powder Inductor for AC Transformer – Pourleroi

    China Factory for High Quality High Frequency Iron Core Split - Sendust Core Powder Inductor for AC Transformer – Pourleroi

    What are the advantages of iron-silicon-aluminum magnetic ring in the application of inductors Although ferrosilicon has a higher saturation flux density, ferrosilicon has more advantages, such as better soft saturation, low core loss, temperature stability and lower cost. When the inductor uses the iron-silicon-aluminum magnetic powder core, the disadvantageous factors brought by the use of the air-gap ferrite magnetic ring can be eliminated. FeSiAl magnetic ring 1. The magnetic flux density...
  • China Factory for Multi-Cut Amorphous C Core - Amorphous Magnetic Cores For High Frequency Electronics – Pourleroi

    China Factory for Multi-Cut Amorphous C Core - Amorphous Magnetic Cores For High Frequency Electronics – Pourleroi

    AC Reactor | DC Reactor | PFC boost inductor: Under 6kW (Mircolite 100µ),  Over 6kW Common mode chokes | MagAmp | Differential mode chokes / SMPS output inductor Spike absorbing cores Performance Characteristics ·High saturation magnetic induction intensity-reduce core volume, ·Rectangular structure – easy coil assembly Core opening – excellent resistance to DC bias saturation ·Low loss – reduce temperature rise (1/5-1/10 of silicon steel) ·Good stability—can work at -50~130...
  • Cheapest Factory Common Mode Choke Finemet Core - High Inductance Sendust Core Sendust Block Core High Permeability – Pourleroi

    Cheapest Factory Common Mode Choke Finemet Core - High Inductance Sendust Core Sendust Block Core High Permeability – Pourleroi

    Sendust is a magnetic metal powder that was invented by Hakaru Masumoto at Tohoku Imperial University in Sendai, Japan, about 1936 as an alternative to permalloy in inductor applications for telephone networks. Sendust composition is typically 85% iron, 9% silicon and 6% aluminium. The powder is sintered into cores to manufacture inductors. Sendust cores have high magnetic permeability (up to 140 000), low loss, low coercivity (5 A/m) good temperature stability and saturation flux density up ...
  • Good Quality Distribution Transformer Amorphous Core - Sendust Core for Power Inductor – Pourleroi

    Good Quality Distribution Transformer Amorphous Core - Sendust Core for Power Inductor – Pourleroi

    Comprising 85% iron (Fe), 9% silicon (Si) & 6% aluminum (Al), Sendust is an alloy powder material widely used in magnetics applications. It’s alternatively called as Kool Mu by Magnetics. It features itself with a low loss, relatively high saturation flux density (10,500 Gauss), close to zero magnetostriction as well as a very stable performance at high termperature, or say, no thermal aging.   What are the advantages of sendust core ? 1.Significantly lower core losses than Iro...
  • Original Factory Electric Vehicle Emi Filter Amorphous Nano Core - Amorphous core /Amorphous cut core – Pourleroi

    Original Factory Electric Vehicle Emi Filter Amorphous Nano Core - Amorphous core /Amorphous cut core – Pourleroi

    Features + High saturation magnetic induction – reduce core volume; + Rectangular structure—convenient for coil assembly; + Core opening – excellent resistance to DC bias saturation; + Low loss – reduce temperature rise (1/5 – 1/10 of silicon steel); + Good stability – can work at -55-130 ℃ for a long time. Application field ·Inverter reactor, transformer core ·Wide constant permeability inductor core, PFC inductor core ·Intermediate frequency transformer c...