Featured

  • professional factory for Amorphous Core Magnet - Amorphous core /Amorphous cut core – Pourleroi

    professional factory for Amorphous Core Magnet - Amorphous core /Amorphous cut core – Pourleroi

    Features + High saturation magnetic induction – reduce core volume; + Rectangular structure—convenient for coil assembly; + Core opening – excellent resistance to DC bias saturation; + Low loss – reduce temperature rise (1/5 – 1/10 of silicon steel); + Good stability – can work at -55-130 ℃ for a long time. Application field ·Inverter reactor, transformer core ·Wide constant permeability inductor core, PFC inductor core ·Intermediate frequency transformer c...
  • Original Factory Low Cost Amorphous Core Current Transformer - High Inductance Sendust Core Sendust Block Core High Permeability – Pourleroi

    Original Factory Low Cost Amorphous Core Current Transformer - High Inductance Sendust Core Sendust Block Core High Permeability – Pourleroi

    Sendust is a magnetic metal powder that was invented by Hakaru Masumoto at Tohoku Imperial University in Sendai, Japan, about 1936 as an alternative to permalloy in inductor applications for telephone networks. Sendust composition is typically 85% iron, 9% silicon and 6% aluminium. The powder is sintered into cores to manufacture inductors. Sendust cores have high magnetic permeability (up to 140 000), low loss, low coercivity (5 A/m) good temperature stability and saturation flux density up ...
  • Factory directly Motor Cable Noise Filter Soft Magnetic Core - High Inductance Sendust Core Sendust Block Core High Permeability – Pourleroi

    Factory directly Motor Cable Noise Filter Soft Magnetic Core - High Inductance Sendust Core Sendust Block Core High Permeability – Pourleroi

    Sendust is a magnetic metal powder that was invented by Hakaru Masumoto at Tohoku Imperial University in Sendai, Japan, about 1936 as an alternative to permalloy in inductor applications for telephone networks. Sendust composition is typically 85% iron, 9% silicon and 6% aluminium. The powder is sintered into cores to manufacture inductors. Sendust cores have high magnetic permeability (up to 140 000), low loss, low coercivity (5 A/m) good temperature stability and saturation flux density up ...
  • Good Quality Amorphous Magnetic Cores - Amorphous cut C core amcc for inductor – Pourleroi

    Good Quality Amorphous Magnetic Cores - Amorphous cut C core amcc for inductor – Pourleroi

    Amorphous C core is suitable for high power usage, C type core is easy to install, easy to wind copper wire.High saturation flux density, low core loss. Widely used for solar inverter filter, medium frequency transformer, output inductor, PFC coke. Amorphous magnetic cores have superior magnetic characteristics, such as lower core loss, when compared with conventional crystalline magnetic materials. Amorphous core metals are characterized by the lack of the usual crystalline structure with g...
  • Best-Selling Nanocrystalline Nanocrystalline Core With Eorrosion Resistance - Sendust Ring Inductors Powder Core – Pourleroi

    Best-Selling Nanocrystalline Nanocrystalline Core With Eorrosion Resistance - Sendust Ring Inductors Powder Core – Pourleroi

    In 1932,Masumoto and Yamamoto at Tohoku Imperial University developed new Fe–Si–Al alloys. The alloys were discovered in Sendai and designed for magnetic dust core, so they named the alloys “Sendust” (Masumoto and Yamamoto, 1937). They found that the alloys with 6–11 wt% Si and 4–8 wt% Al show excellent soft magnetic properties. Among them, the Fe–9.62Si–5.38Al shows the largest initial permeability of 35100 and a low coercivity of 1.75 A/m; the Fe–9.66Si–6.21Al shows the largest maximum perm...
  • China Manufacturer for High Quality Nanocrystalline Toroidal Core - Sendust Core Powder Inductor for AC Transformer – Pourleroi

    China Manufacturer for High Quality Nanocrystalline Toroidal Core - Sendust Core Powder Inductor for AC Transformer – Pourleroi

    What are the advantages of iron-silicon-aluminum magnetic ring in the application of inductors Although ferrosilicon has a higher saturation flux density, ferrosilicon has more advantages, such as better soft saturation, low core loss, temperature stability and lower cost. When the inductor uses the iron-silicon-aluminum magnetic powder core, the disadvantageous factors brought by the use of the air-gap ferrite magnetic ring can be eliminated. FeSiAl magnetic ring 1. The magnetic flux density...
  • Best Price for Transformer Core Cutting - Sendust Core Powder Inductor for AC Transformer – Pourleroi

    Best Price for Transformer Core Cutting - Sendust Core Powder Inductor for AC Transformer – Pourleroi

    What are the advantages of iron-silicon-aluminum magnetic ring in the application of inductors Although ferrosilicon has a higher saturation flux density, ferrosilicon has more advantages, such as better soft saturation, low core loss, temperature stability and lower cost. When the inductor uses the iron-silicon-aluminum magnetic powder core, the disadvantageous factors brought by the use of the air-gap ferrite magnetic ring can be eliminated. FeSiAl magnetic ring 1. The magnetic flux density...
  • Newly Arrival Iron-Based Amorphous Square Cut Core - Amorphous Big Triangle core in Power Systems – Pourleroi

    Newly Arrival Iron-Based Amorphous Square Cut Core - Amorphous Big Triangle core in Power Systems – Pourleroi

    Amorphous alloy transformer is a low loss, high energy efficiency power transformer. This type of transformer uses an iron-based amorphous metal as the iron core. Since the material does not have a long-range ordered structure, its magnetization and demagnetization are easier than those of general magnetic materials. The iron loss of amorphous alloy transformers is 70-80% lower than that of traditional transformers that generally use silicon steel as the iron core. As losses are reduced, the ...
  • Popular Design for Nanocrystalline Cutting C Core - High Flux Cores – Pourleroi

    Popular Design for Nanocrystalline Cutting C Core - High Flux Cores – Pourleroi

    High flux cores are designed to operate up to about 6500 gauss, as opposed to the 3500 gauss limit of standard MP (Mollypermalloy) cores. There is some sacrifice in stability because less distributed air gap is required to obtain the reduced permeabilities. Core losses are also higher than MP, although because of their high flux and power-handling capabilities, HF cores are used as energy storage inductors and in line output (flyback) transformers in SMPS. They are also especially well suited...
  • Leading Manufacturer for Wind Power Core - Sendust Cutting Core for Flat Wire Winding – Pourleroi

    Leading Manufacturer for Wind Power Core - Sendust Cutting Core for Flat Wire Winding – Pourleroi

    FeSiAl magnetic ring 1. The magnetic flux density of the ferrite is equal to or less than 0.5T, which is less than half of the iron-silicon-aluminum alloy. Therefore, under the same volume, the energy storage capacity of ferrite is also lower than that of iron-silicon-aluminum alloy. 2. In addition, the full magnetic flux density of ferrite is greatly reduced under high temperature conditions, while high temperature conditions have no obvious effect on FeSiAl. 3. Ferrite has the characteristi...
  • Professional China Split C Core - Sendust Core Powder Inductor for AC Transformer – Pourleroi

    Professional China Split C Core - Sendust Core Powder Inductor for AC Transformer – Pourleroi

    What are the advantages of iron-silicon-aluminum magnetic ring in the application of inductors Although ferrosilicon has a higher saturation flux density, ferrosilicon has more advantages, such as better soft saturation, low core loss, temperature stability and lower cost. When the inductor uses the iron-silicon-aluminum magnetic powder core, the disadvantageous factors brought by the use of the air-gap ferrite magnetic ring can be eliminated. FeSiAl magnetic ring 1. The magnetic flux density...
  • 2022 New Style C-Type Transformer Cores - Sendust Core for Power Inductor – Pourleroi

    2022 New Style C-Type Transformer Cores - Sendust Core for Power Inductor – Pourleroi

    Comprising 85% iron (Fe), 9% silicon (Si) & 6% aluminum (Al), Sendust is an alloy powder material widely used in magnetics applications. It’s alternatively called as Kool Mu by Magnetics. It features itself with a low loss, relatively high saturation flux density (10,500 Gauss), close to zero magnetostriction as well as a very stable performance at high termperature, or say, no thermal aging.   What are the advantages of sendust core ? 1.Significantly lower core losses than Iro...